Rose CrystalView Plus Manual de instrucciones Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 44
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL
29
Only video is required, but no picture appears.
The probable cause is that power to the Local Unit is not applied. The
Local Unit obtains its power from the CPUs keyboard port. A keyboard
cable must be connected from the Local Unit to the CPU even if no
keyboard is required. A supplementary power supply can be obtained
that connects to the Local Units keyboard connector.
System does not detect a PS/2 mouse
Keyboard and mouse cables reversed on the Local Unit.
Cable is loose; re-seat mouse cable on the CPU and the Local Unit.
Ensure that the keyboard cable to the Local Unit is connected to provide
adequate power to the Local Unit.
If you are connecting the local unit to a CPU with power applied,
connect the mouse cable to the CPU before you connect the keyboard
cable to ensure the mouse is correctly detected.
Re-boot PC.
Keyboard error on boot-up
Press [F1] or [Esc] and if this corrects the problem, modify the BIOS
setting to disable keyboard testing during boot-up.
No sound at the Remote Units speakers or headphones.
Audio cable loose or defective.
Audio cable in the wrong connector.
Sound card “Line Out” muted.
No sound at the CPUs speakers when using a Microphone on the
Remote Unit.
Microphone cable in wrong connector.
Sound card “MIC” input muted.
Microphone signal not amplified; increase sound card amplification by
+20db. Add “MIC” jumper on the Remote Units daughter board to
increase signal. Do not add this jumper if the microphone is already a
powered microphone.
Serial device does not function
Serial cable loose or defective.
Flow control incorrectly set on unit or CPU.
Connect serial device directly to the CPU’s serial port and check to
determine if the problem is a PC or CrystalView Plus
problem.
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Comentarios a estos manuales

Sin comentarios